Spec a complete control system — controller, racks, I/O, communications and distributed stations over the fieldbus — for the major automation platforms. Compatibility, power and network topology update live, and you can export the bill of materials in seconds.
S7-1200 & S7-1500 controllers, ET 200 distributed I/O over PROFINET / PROFIBUS.
ControlLogix, CompactLogix & Micro800 with POINT / Flex distributed I/O over EtherNet/IP.
Modicon M580 ePAC, M340 & M241 with X80 distributed I/O over EtherNet/IP & Modbus.
AC500 & AC500-eCo PLCs with S500 distributed I/O over PROFINET, PROFIBUS & EtherCAT.
MELSEC iQ-R & iQ-F controllers with CC-Link IE Field distributed I/O.
PACSystems RX3i controllers with RSTi-EP distributed I/O over PROFINET & EtherNet/IP.
More platforms on request. Need something configured? Talk to our engineers →
Our SCADA platform and the standalone utilities from the Praximus toolbox — download them and run them on your PC.
Browser-based SCADA for Windows — ISA-101 HMI in 2D and 3D, ISA-18.2 alarming, historian, trends, OEE and reporting over Modbus, OPC UA, S7, EtherNet/IP and MQTT. Runs as a Windows Service, free 30-day trial.
Screenshots, editions, install & licensing on the SENTRIQ page.
Simulate Modbus TCP / RTU devices on your PC — drive holding/input registers, coils and discrete inputs to test HMI, SCADA and PLC communications without field hardware.
Unsigned build — Windows SmartScreen may prompt; choose “More info → Run anyway”.